"Run test applications" in Your preferences. It helped in my case.

Activated it, atm "project has no tasks available".

Hmmm.
My settings "ticked":
Use NVidia GPU
Run test applications

Run only the selected applications
Enigma 0.76: no
Enigma AV: no
Enigma GPU: yes
Enigma GPU - Test version: yes

After I checked that fields WU started to flow.

Edit: maybe You have app_config that cause error?

So, now I´m getting tasks!

But...

wrapper [26118 765 +dev#]: starting (GPU #0)
13:07:07 (33288): wrapper: running enigma_cuda.exe (-d 0 -R -o results.txt 04trigr.cur 04unigr.cur 04ciphertext)
CUDA error: C:/Proj/Other/Enigma/enigma-cuda/enigma-cuda-lib/cuda_code.cu:784:  CUDA driver version is insufficient for CUDA runtime versionInitialization failed: CUDA error: C:/Proj/Other/Enigma/enigma-cuda/enigma-cuda-lib/cuda_code.cu:784:  CUDA driver version is insufficient for CUDA runtime version
app exit status: 0x2

I´m updating my driver, which is now 1 year old... :)
They should work then, I hope.
Anyway, never had any problem on Einstein or BURP with GPU work. :/

EDIT: Seems to work. :)

Few weeks ago, I published new version of enigma-opencl that supports RX VEGA under Mesa3D drivers. This version is working under drivers without full OpenCL support (even if clinfo doesn't works under RX VEGA) thanks embedded all in an assembly code.
New version in: https://github.com/matszpk/enigma-cuda/releases/tag/gcnopt0.2r1-3-test

hi,
can we have some wu´s for amd gpu´s please ?

hi,
can we have some wu´s for amd gpu´s please ?

And for CPUs? Nothing from Enigma AV in a while...

GPU WU's always get an error message when calculating starts.
They always get aborted.

How comes ?

GPU WU's always get an error message when calculating starts.
They always get aborted.

How comes ?

Nvidia??

New version enigma-opencl (Linux and Windows) and enigma-cuda for the Linux. I built Linux versions by using older GCC 4.8 compiler and these versions are comformant with older system C++ libraries (can works on more and older Linux systems with C++ library from GCC 4.8 compiler). New binaries are here: https://github.com/matszpk/enigma-cuda/releases/tag/gcnopt0.2r1-4-test.
If you encountered troubles with running enigma-opencl or enigma-cuda for Linux you can download these binaries and make an app_info.xml.
I hope that these versions will be deployed soon (I notifying administrator about it).

Open-GL, is that available for Intel HD GPU??

I have a dual GPU chip system which I can take advantage of both the Intel and nVidia.

How does one use these test versions? I've never downloaded apps for Boinc manually, just instead gotten whatever the project sends to my machine. Is there a 'manual' for this somewhere?

How does one use these test versions? I've never downloaded apps for Boinc manually, just instead gotten whatever the project sends to my machine. Is there a 'manual' for this somewhere?

Yes, how does one use these?

Go to the project settings and tick the box that you want to use test applications.

Are the GPU-WUs still Beta-Versions?

New version enigma-opencl (Linux and Windows) and enigma-cuda for the Linux. I built Linux versions by using older GCC 4.8 compiler and these versions are comformant with older system C++ libraries (can works on more and older Linux systems with C++ library from GCC 4.8 compiler). New binaries are here: https://github.com/matszpk/enigma-cuda/releases/tag/gcnopt0.2r1-4-test.
If you encountered troubles with running enigma-opencl or enigma-cuda for Linux you can download these binaries and make an app_info.xml.
I hope that these versions will be deployed soon (I notifying administrator about it).

Does anybody have a working app_info.xml for this, please?

I had to reset GPU performance stats listed here GPU speed because the script did not sum points correctly when the app runtime was very short and the app used less than 100s of CPU time. Mostly AMD cards running OpenCL apps were affected and I finally found the bug when I noticed RX Vega at the bottom with speed index of 0.

Is there still an issue with the Speed Index table?

I ran my Sapphire Vega 64 for a day or 2 about 4-5 weeks ago to test out what it can do and was expecting it to show/move the Vega 64 up the list quite a bit.

For me the GPU app still only works on one GPU, allowing two WU's to run only runs them both on the same GPU which leaves any other GPU's doing nothing. For me at least nothing has changed :(

For sh#%s & giggles I even tried to changing the command to -d 1 in the job_160.xml file and another time tried pausing the WU and changing it in job.xml file in the slot directory but with the same result. As far as boinc is aware all is working as it should be with a WU running on each device but in reality there both being crunched by the same GPU.

Add a 2nd copy of Boinc in a totally different set of folders from the defualt if that's where the existing copy is installed and use the exclude command to exclude gpu0 in the existing boinc and gpu1 in the 2nd copy of Boinc, then you can mange each gpu independently.

What on this this God forsaken Earth does it take to get GPU work? Every time the server shows work available I hammer the thing and have yet to get even one task!!!! Win XP, GT 730, works fine on all other GPU projects. Prefs are correct (Nvidia GPU and even test apps checked).

Hello,
At least we are two crunchers with the same problem !!!
I have nvidia GTX950 on one host and ATI RX580 on a other.
Both CPU Intel 2600K
Win7 x64.
My preferences are set to accept all(and also accept task if no work available.....),
use CPU/ATI/nvidia are validated

I never received a GPU tasks !

Here is BOINC app stuff with configuration files for project: http://files.nativeboinc.org/enigma_app_stuff/.
This package contains same application, modified wrapper (with source code) and configuration for to run application under BOINC.
In README.txt is instruction how to install application and how tune.
Currently, only package for Linux x64 (AMD64, 64-bit) platform.

Hello Matszpk
Thank you for answer.

I do not think all user around the world will start such procedure.
By the way, how many percent of the Boinc users runs under Linux / AMD platform and also with ATI ?
A few percent I think. And from this very few percent, how many users are able to do all this ?
And this percentage need to be apply on the total of 69.300 users.
From the hundreds thousands of Boinc active users, there are only 1973 able to crunch.
If you not need the computation power of all other why to use Boinc ?
Or release CPU WU.

By the way, normally, to crunch, all would be in full automatic. Like all other projects.

Not forget your project is candidate for competitions between team all around the world.

Best regards

---