With the Open64 Intel CORE, a gain of 40.30% on a E5200 !Very nice !
on Gentoo64b

By the way, is the Buninek for 64b faster on AMD X2 than your opti mdoerner ?
Definitly on 32b but what about 64b ?
Thanks !

I think the Bunirek app was 32-bit only. It was slower than my 64-bit apps, but only by a few seconds in the benchmark. That was on an AMD Phenom. On an actual Athlon64 processor, TJM was able to knock a minute off one of his benchmark times with a shortened benchmark. I'd PM Bunirek for his app and ask him how it runs compared to the Open64 apps I compiled.

Mike D

---

Thank you !
Haha...I've asked the same thing by PM...;)

Static 64-bit application compiled with gcc 4.3.3 on Slackware64-current.

http://js.yokozuna.ru/enigma-core2-x86_64-static.tar.bz2

Modified 'compile' and 'load' scripts are included.
'compile' added with "-march=core2"
'load' added with "-static"

Enjoy :)

Static 64-bit application compiled with gcc 4.3.3 on Slackware64-current.

http://js.yokozuna.ru/enigma-core2-x86_64-static.tar.bz2

Modified 'compile' and 'load' scripts are included.
'compile' added with "-march=core2"
'load' added with "-static"

Enjoy :)

Is it faster than TJM's P3 32-bit app from gcc 3.2? Or any gcc 4.4.0 apps generated in 64-bit?

Mike D

---

I can't provide direct comparison due Slackware64-current have not 32-bits libs and so do not execute 32-bit dynamic binaries (unfortunately, all of binaries from test.tgz are dynamic, not static)

So I separately run two benchmarks, one for my own compiled 64-bits app on Slackware64 and one for precompiled pentium3 on Slackware 12.2 (32-bits).

CPU is Intel Core 2 Duo E4400.

pentium3 app benched in 3m 55s
my 64-bits app run benched in 3m 45s

Dtiger, your application on my T9400 on gentoo64 gave me an average of 1374.09s.
It doesn't perform better than mdoerner's opti.

Please excuse teh nOOb question, but I've breezed through this thread and can't find the answer - or I'm blind at this time of the morning.

Is there an opti app for 'doze (any instruction set)?

Hi The Gas Gaint - I think i've seen you over @ milkyway :D

Yes there is an optimized app, but i think the links might be down, pm me your email and i'll happily send you the archives.

:D

EDIT - I've just tested the links and they are ok, its the very top two in the OP

Hi The Gas Gaint - I think i've seen you over @ milkyway :D

Yes there is an optimized app, but i think the links might be down, pm me your email and i'll happily send you the archives.

:D

EDIT - I've just tested the links and they are ok, its the very top two in the OP

OK...got it. I didn't realise that they were it.

I am loving MW atm but need something other than SETI to crunch while MalariaControl is out of work....This looks good!

Windows 64bit:

http://tjm.boo.pl/enigma/app/windows_x86_64.zip

This doesn't work. I am getting "Your app_info.xml file doesn't have a version of Enigma 0.76b.

Is there a newer version of the 64 bit win app or something? I don't see it anywhere in the original post of this thread listing the apps.

---

Dublin, CA
Team SETI.USA

Windows 64bit:

http://tjm.boo.pl/enigma/app/windows_x86_64.zip

This doesn't work. I am getting "Your app_info.xml file doesn't have a version of Enigma 0.76b.

Is there a newer version of the 64 bit win app or something? I don't see it anywhere in the original post of this thread listing the apps.

Did you replace the other files as well?

Mike Doerner

---

Yes, everything from the zip file was copied over.

---

Dublin, CA
Team SETI.USA

Hmmmmm.....TJM may have to answer that one.

Mike D

---

Windows 64bit:

http://tjm.boo.pl/enigma/app/windows_x86_64.zip

This doesn't work. I am getting "Your app_info.xml file doesn't have a version of Enigma 0.76b.

Is there a newer version of the 64 bit win app or something? I don't see it anywhere in the original post of this thread listing the apps.

I am getting the same error..

You'd have to add some lines to the app_info, but that app does not work at all (crashes immediately)...

I guess that some of the app_info.xml files are outdated, I'll check them all and I'll post updated versions later today.

EDIT: I've just checked the app_info files, you must be running very old app if it doesn't support the second app version. The app_info files from the first post in this thread are a bit outdated, but it doesn't matter - they both have both new and old applications defined, just the old one is not used anymore. I edited the files anyway and removed the unused app, but I can't replace the archives at this moment because the ftp server does't work for some reason, I'll retry later.

This is how the Windows app_info should look like

<app_info>
   <app>
      <name>enigma_m4_2</name>
      <user_friendly_name>Enigma 0.76b-Opt</user_friendly_name>
   </app>
   <file_info>
      <name>wrapper_5.22_windows_intelx86.exe</name>
      <executable/>
   </file_info>
   <file_info>
       <name>enigma_0.76_windows_intelx86.exe</name>
       <executable/>
   </file_info>
   <file_info>
       <name>job_1.22.xml</name>
   </file_info>
   <app_version>
      <app_name>enigma_m4_2</app_name>
      <version_num>522</version_num>
      <file_ref>
         <file_name>wrapper_5.22_windows_intelx86.exe</file_name>
         <main_program/>
      </file_ref>
      <file_ref>
        <file_name>enigma_0.76_windows_intelx86.exe</file_name>
	<open_name>enigma2_0.76_windows_intelx86.exe</open_name>
      </file_ref>
      <file_ref>
         <file_name>job_1.22.xml</file_name>
         <open_name>job.xml</open_name>
      </file_ref>
   </app_version>
</app_info>

It requires only 3 files to run:
The job.xml - default filename job_1.22.xml
The wrapper, default filename wrapper_5.22_windows_intelx86.exe
The enigma executable, default filename: enigma_0.76_windows_intelx86.exe

The old app description contained also two dictionaries and ciphertext, these files are not needed anymore as they are now assigned to workunits, not application.

Older app_info used separate executable file for the second app, but since the executables were the same and only workunit templates have changed, the newer app_info used the same executable (enigma_0.76_windows_intelx86.exe) for both apps, but the second app assigned a virtual name () to the app, that's why it's called enigma2_0.76_windows_intelx86.exe in job_1.22.xml

All file names can be changed by editing the app_info.xml, just remember that the file name on disk has to match the name inside .xml file, and the app will work fine.

---

M4 Project homepage
M4 Project wiki

Windows 64bit:

http://tjm.boo.pl/enigma/app/windows_x86_64.zip

app_info from Message 1117. Doesn't work on Core i7

<core_client_version>6.6.37</core_client_version>
<![CDATA[
<message>
- exit code -148 (0xffffff6c)
</message>
<stderr_txt>
running enigma_1.00_windows_x86_64.exe
can't run app: -148

</stderr_txt>
]]>

Which one of these will work for an Athlon X2 3800 under Windows 32 bit? I've tried 3 of them and all puke immediately with computation errors. It's my only 32 bit OS, all the 64s are running fine. Going to be rebuilding the system soon anyway w/Win 7 64b, just thought I'd try to let it run some more work first.

Edit: Nevermind, found one that works. Guess I'll let it run and see if it helps any. It doesn't say Opt in the task list though, all the other systems do. Maybe a 32b link would still be helpful.

---

I guess that some of the app_info.xml files are outdated, I'll check them all and I'll post updated versions later today.

EDIT: I've just checked the app_info files, you must be running very old app if it doesn't support the second app version. The app_info files from the first post in this thread are a bit outdated, but it doesn't matter - they both have both new and old applications defined, just the old one is not used anymore. I edited the files anyway and removed the unused app, but I can't replace the archives at this moment because the ftp server does't work for some reason, I'll retry later.

well, the windows_x86_64.zip contains the following app_info.xml:

<app_info>
   <app>
      <name>enigma_m4_naval_2</name>
      <user_friendly_name>Enigma x86-64</user_friendly_name>
   </app>
   <file_info>
      <name>wrapper_1.00_windows_x86_64.exe</name>
      <executable/>
   </file_info>
   <file_info>
       <name>enigma_1.00_windows_x86_64.exe</name>
       <executable/>
   </file_info>
   <file_info>
       <name>00trigr.naval</name>
   </file_info>
   <file_info>
       <name>00bigr.naval</name>
   </file_info>
   <file_info>
       <name>ciphertext2</name>
   </file_info>
   <file_info>
       <name>job_1.14.xml</name>
   </file_info>
   <app_version>
      <app_name>enigma_m4_naval_2</app_name>
      <version_num>517</version_num>
      <file_ref>
         <file_name>wrapper_1.00_windows_x86_64.exe</file_name>
         <main_program/>
      </file_ref>
      <file_ref>
         <file_name>enigma_1.00_windows_x86_64.exe</file_name>
      </file_ref>
      <file_ref>
         <file_name>00trigr.naval</file_name>
         <copy_file/>
      </file_ref>
      <file_ref>
         <file_name>00bigr.naval</file_name>
	 <copy_file/>
      </file_ref>
      <file_ref>
         <file_name>ciphertext2</file_name>
	 <copy_file/>
      </file_ref>
      <file_ref>
         <file_name>job_1.14.xml</file_name>
         <open_name>job.xml</open_name>
      </file_ref>
   </app_version>

</app_info>

i guess part of the issue stems from a lack of enigma_m4_2. also tricking it into using enigma_1.00_windows_x86_64.exe seems to be part 2...

This is how the Windows app_info should look like

<snip>

It requires only 3 files to run:
The job.xml - default filename job_1.22.xml
The wrapper, default filename wrapper_5.22_windows_intelx86.exe
The enigma executable, default filename: enigma_0.76_windows_intelx86.exe

The old app description contained also two dictionaries and ciphertext, these files are not needed anymore as they are now assigned to workunits, not application.

Older app_info used separate executable file for the second app, but since the executables were the same and only workunit templates have changed, the newer app_info used the same executable (enigma_0.76_windows_intelx86.exe) for both apps, but the second app assigned a virtual name (<open_name>) to the app, that's why it's called enigma2_0.76_windows_intelx86.exe in job_1.22.xml

All file names can be changed by editing the app_info.xml, just remember that the file name on disk has to match the name inside .xml file, and the app will work fine.

please post what SHOULD be in the app_info.xml (and/or how the files should be named). i'm eagerly awaiting being able to try x64 as i'm having issues linux-side on my phenom :/ (and waaaaay too many jacked up results >_<)

A link to the correct app_info.xml

Just take a look at the names in the .xml and rename your files, or edit the xml to match your filenames.

---

M4 Project homepage
M4 Project wiki